Servicing Melbourne-Wide
35+ Years In Plastering Industry
10 Year Installation Guaranteed
100% Client Satisfaction
Service | Repair | Maintenance
“Vista plastering? More like superstar plastering! Peter and his team came to the job and completed their work, exceeding all of our standards and at such short notice. Could not recommend them more!”
When you need internal framing done clean, fast, and to spec we’re the crew that gets it right the first time. We install non-load bearing metal stud and track systems across Melbourne for builders, PMs, fit-out teams, and shopfitters who don’t have time for delays or reworks.
Whether you’re framing out an office, medical fit-out, or multi-unit resi, we’ll supply and install Rondo or Studco tracks, and prepare your walls for plasterboard, insulation, or service access all to NCC and AS/NZS standards.
Need steel stud framing that’s on time, dead-straight, and ready for board?
Request your fast quote now
Expert metal wall studs installation for accuracy, strength, and seamless results – From commercial fit-outs to home renovations. We specialise in installing metal framing and delivering flawless metal wall studs installation across Melbourne.
Metal stud framing isn’t just about putting up steel it’s about getting your fit out off to the right start. A clean, accurate frame makes everything that comes after easier: plasterboard goes on straighter, services line up properly, and there’s less downtime fixing other people’s mistakes.
We take the time to measure right, cut clean, and install with purpose ur so yosite stays on track, your finish is sharp, and the job gets handed over without headaches.
We specialise in installing metal framing and full metal stud and track systems for internal walls and ceilings for plasterboard, insulation, and services. Whether it’s a single tenancy fit-out or a multi-room build, we handle layout, fixings, and installation with precision for lasting strength and clean finishes.
We work with Rondo,Studco, and custom systems, following NCC and AS/NZS 2589:2007 standards ensuring straight lines, square corners, and compliant walls from day one. All framing jobs can include full plasterboard lining.
We supply and install light gauge steel studs and tracks in a range of widths and profiles, cut to plan and anchored securely to concrete, slab or ceiling grid.
Framing for partition walls, bulkheads, soffits, and suspended ceilings all installed level, flush, and ready for board or cladding.
We allow for electrical and plumbing routes, integrate noggings and bracing where required, and frame to fire rated or acoustic system specs.
Every job is laid out per your drawings or site mark ups. All fixings are compliant and fastened to manufacturer recommendations no shortcuts.
Metal stud framing has become the go-to choice for commercial fit-outs, offices, medical spaces, and high-use internal partitions. Why? Because it’s strong, non-combustible, and doesn’t bow, twist, or shrink like timber making it ideal for sharp finishes and long-term durability.
While timber framing still has its place in residential builds, metal stud systems are now standard across most commercial fit-outs. They’re straighter, faster to install, and ideal for spaces that need acoustic control, fire compliance, or layout flexibility.
We installed over 600 linear metres of Rondo steel stud and track framing across office walls, meeting rooms, staff breakouts, and corridors including bulkheads, door frames, and return walls.
We worked to acoustic and fire-rated specs using 64mm steel studs at 600mm centres, prepped for insulation install. All fixings and layouts followed AS/NZS 2589 and NCC requirements.
The site was fully active with HVAC and electrical trades working in parallel. We completed framing in 4 business days, keeping to the builder’s staging plan with zero delays or rework requests.
We don’t do ballpark guesses we quote based on real drawings, real specs, and real experience. The cost of steel stud framing can vary depending on site access, framing complexity, acoustic or fire-rated requirements, and the size of your project.
Here’s what goes into your quote:
More square meters = more materials and labour. We’ll measure accurately and quote per zone.
Standard height? No problem. Extra tall partitions or closer stud centers (450mm vs 600mm)? We’ll factor it in.
We install framing that meets NCC specs for fire and sound. These systems take longer and use denser materials but pass inspection the first time.
Custom features take longer and require tighter install. We’ll call them out clearly in your quote.
Tight basements, multi-level access, or limited working hours? We’ll plan around them but we’re upfront about how that impacts the job.
But we don’t expect you to guess just send us a drawing and we’ll quote fast.
Metal stud framing isn’t something you want to babysit. When you bring us in, you get a team experienced in installing metal stud wall systems that are straight, strong, and built to plan. We know how to work around other trades and deliver a precise, on-time installation without delays.
We’ve framed everything from single office tenancies to multi-level commercial fit-outs, and we show up with the right tools, the right system, and the right crew to get the job done.
Over 35 years of internal framing & plastering experience We work with Rondo, Studco & NCC-compliant systems Always on-spec, on-time, and site-ready Clean handovers no mess, no excuses Licensed, insured, and AS/NZS 2589 certified work Fast quotes with clear inclusions (no hidden extras)
Steel stud framing is straighter, more fire-resistant, and doesn’t warp, shrink, or rot like timber. It’s ideal for internal partitions, especially in commercial fit-outs where precision and compliance matter.
Prices usually range from $75–$120 per sqm, depending on height, stud spacing, complexity, and compliance needs (like fire-rating or acoustic separation). We quote fast, based on plans or site specs.
Absolutely. We frame internal walls, suspended ceilings, bulkheads, and soffits all built to spec and ready for plasterboard or cladding.
Both. We can quote just framing, or a full package that includes plasterboard installation, set & sand, insulation, and handover ready for paint or fit-out.
Yes, we frequently install framing to suit fire-rated and acoustic specifications, using compliant spacing, noggings, and board prep where required.
Yes, we can supply and install thermal or acoustic insulation batts as part of the framing process. It’s a common add-on in office, education, or healthcare projects.
Yes, we’re used to working around electricians, plumbers, and HVAC. We communicate with site supervisors and stick to staging so the whole job runs smoother.
Small tenancy or office fit-outs can be framed in 1–3 days. Larger multi-room projects usually take up to a week, depending on size, access, and other trades on-site.
Yes, all framing is installed to National Construction Code (NCC) and AS/NZS 2589 standards. We follow best practices and provide compliant finishes for inspections.
We take pride in delivering high-quality commercial and residential plastering projects across Melbourne. Check out some of our latest work.
At Vista Plastering Melbourne, we collaborate with a wide range of clients, providing high-quality plastering solutions tailored to their needs. With over 35 years of industry experience, we have built strong relationships with:
•We help homeowners and renovators with top-quality plastering for smooth, long-lasting finishes.
• Whether you’re fixing up a room, adding an extension, or restoring a heritage home, we tailor our services to match your style and needs.
• We work with builders and developers on large commercial projects, delivering high-quality plastering that meets all building requirements
•Our team gets the job done on time and within budget, with a strong focus on reliability and craftsmanship.
• From offices and retail spaces to warehouses, we provide expert plastering that looks great and holds up over time.
• We also specialise in acoustic and fire-rated plastering, helping businesses create safer and more functional spaces with minimal disruption.
• We handle plaster repairs and maintenance for rental properties, keeping them in top shape for owners and tenants.
• Quick response times and professional finishes mean fewer hassles and a well-maintained property.
• We work on government and infrastructure projects, providing plastering built to last in busy, high-traffic spaces.
• Every job meets strict regulations and project requirements, with a focus on durability, efficiency, and staying on schedule.
• We take care of plastering work for insurance claims and body corporate properties, making sure everything is up to standard.
• Our team works efficiently to complete repairs with minimal fuss, getting properties back to normal as quickly as possible.
We used Vista for the steel stud framing in a 400sqm office refit — everything was installed dead straight, on time, and exactly to plan. They worked in tight with our sparkies and plasterers without holding anyone up. Great communication and no mess left behind.
We’ve used a lot of framing crews, but Vista’s team is different. Fast, focused, and clean. They framed out all walls, returns, and bulkheads for a multi-room fit-out in 3 days flat — and nailed the acoustic wall specs. No punch list, no surprises.
What stood out was how precise their framing work was — every stud, track, and nogging was spot-on. We were using Rondo across a medical fit-out, and Vista made sure everything was compliant with our fire and acoustic ratings. Zero rework needed.
We had a tight timeline on a retail buildout and Vista delivered. They framed to our exact drawings, worked around electricians and HVAC, and stayed flexible when we needed layout tweaks. Honest crew, professional install, and finished ahead of schedule.
Vista framed out our suspended ceilings and internal walls across a new tenancy block in South Melbourne. Every corner lined up, studs were solid, and the site was left spotless. The guys were licensed, switched on, and clearly knew their stuff.
At Vista Plastering Melbourne, we don’t overpromise we just turn up, measure right, install clean, and get out of the way so the next trade can roll through. If you need steel stud framing that’s done to plan, done to spec, and done without the drama we’re ready when you are.
Fill out the quick form and we’ll get back to you with a proper quote usually within 24 hours.
Abdul
Abdul
Abdul
